Lightweight foam
Cargo-conscious 1.8 lb high-density cores — full support without the weight penalty on long drives.
ROAD-TESTED COMFORT
Lightweight high-density foam, durable fabric, made for dinettes, V-cushions, sleeper conversions.
THE COLLECTION
Pick a starting shape — we'll cut it to your dinette, bunk or jackknife sofa.
WHY FOAMERA ON THE ROAD
Stitched for daily living — not for showroom photos.
Cargo-conscious 1.8 lb high-density cores — full support without the weight penalty on long drives.
Heavy-duty Crypton and Aquaclean weaves shrug off coffee, dog paws and decades of weekend trips.
Wedge dinettes, U-shaped lounges, jackknife sofas — patterned to your floor plan, not a generic catalogue size.
Ten to eighteen business days from order to ship — longer for special-order fabrics, communicated upfront.
Five steps from your dinette to a finished, fitted set.
Browse 22 shapes or send a sketch — round, L-shape, custom corners, anything.
Use our live configurator or a video call. We'll guide you to the quarter inch.
Over 1,000 fabrics — performance weaves, linen, velvet. Free swatches at your door.
Piping, ties, zippers, fill type. Fine-tune until it's exactly right.
Made in our atelier in 10–18 business days. Tracked worldwide delivery.
GOOD QUESTIONS
The questions full-timers and weekenders ask us most.
Yes — that's the whole point. We pattern dinette cushions in matched pairs sized to drop into the bed-conversion frame without gaps, and we keep the foam height consistent so the sleeping surface is level. Tell us in the order notes that it's a convertible dinette and we'll double-check seam placement so the conversion zip lines up cleanly. If your existing set works for the bed, send those measurements and we'll match them.
Wedges, trapezoids, L-shapes with one curved side, that one weird angle near the bathroom door — yes, all of it. Lay craft paper down on the bench, trace the outline with a pencil, and photograph it next to a tape. We'll pattern from your trace and confirm the dimensions before cutting. Wedges and other non-rectangular shapes don't cost more — they just take a bit longer in the cutting room.
Three inches is the RV standard and what most factory cushions ship at. Four inches feels noticeably plusher and is great if your dinette doubles as a daily lounge — but check the bed-conversion gap before going thicker, because too much depth and the conversion won't sit flat. For seat cushions only, four works fine; for cushions that also become the bed, three is the safer choice.
Send everything you have and we'll fill the gaps. Most often it's the seat-back angle on a wedge or the depth at the inside corner of an L-shape. We'll either ask for one specific photo (taken with a ruler in frame) or hop on a 15-minute video call to walk through it together. We'd rather pause production than guess — both are free, and they save remakes.
None imposed by us, but practical ones for the rig. Our 1.8 lb HD foam is roughly 30% lighter than 2.5 lb residential foam, and on a full dinette set you'll save several pounds — meaningful when towing. Most dinettes top out at about 4 inches before the bed conversion stops working. If you want a deeper lounge cushion that isn't a bed, you can go up to 6 inches without issue.
Crypton, Revolution and Aquaclean blends are our top three for RVs — all have stain-release finishes, all clean with water and a damp cloth, and all hold up to dogs, kids and the occasional spilled coffee on a switchback. Avoid pure linen and bouclé in heavy-use rigs; they look beautiful for two seasons and tired by year three. Order free swatches and rub them with damp coffee — that's our in-house test.
STILL DECIDING?
Send measurements, photos or a sketch — we will reply within a working day.